GAS DETECTION
CROWCON GAS DETECTION - Triple Plus +
Intrinsically Safe Portable Multi-gas Monitor
The Triple Plus family has set the standard for portable multi-gas monitors with the ir combination of ruggedness, reliability, ease of use, and full flexibility of sensor combinations for flammable gases, oxygen and toxic gases. Intrinsically safe, The Triple Plus + has provided enhanced facilities including selection of flammable gas correction factors, and annotation of the data file with user names and site names selected from pre-configured files in the unit. Also available with Infrared LEL detection.
CROWCON GAS DETECTION - Tetra 3
Intrinsically Safe Portable Multi-gas Monitor
The Tetra:3 multi-gas monitor is the newest addition to the Tetra family. Tetra:3’s single button operation, small size and weight make it the easiest to use gas detector on the market. Based on the proven and highly successful Tetra product, Tetra:3 is designed for use in demanding industrial environments. Despite it’s compact size the Tetra:3 is ultra-rugged and water proof.
CROWCON GAS DETECTION - Tetra
Intrinsically Safe Portable Multi-gas Monitor
Tetra, is a unique multi-gas monitor for the detection of flammable gases, oxygen and toxic gases; Tetra offers flexibility, assurance, robustness and real value for money. Intrinsically safe, Tetra is the only portable gas detector with embedded software designed to the exacting requirements of IEC 61508-3 guaranteeing reliable and dependable operation.
CROWCON GAS DETECTION - Gasman
Intrinsically Safe Portable Multi-gas Monitor
The Gasman full function personal single gas monitor is compact and lightweight yet is fully ruggedized for the toughest of industrial environments. Featuring simple one button operation, it has a large easy to read display of gas concentration, and audible, visual and vibrating alarms.
CROWCON GAS DETECTION - Eikon
Intrinsically Safe Portable Multi-gas Monitor
Eikon is a fixed life personal alarm providing two years of maintenance free continuous monitoring. Tough and rugged, EikonTM is dust and water tight to IP65. Intrinsically safe and available in versions for hydrogen sulfide, carbon monoxide, chlorine, ammonia or for oxygen deficiency monitoring, EikonTM has outstanding audible and visual alarms providing a truly effective warning of hazardous gas conditions.
CROWCON GAS DETECTION - Detective +
Intrinsically Safe Portable Multi-gas Monitor
The Detective+ transportable area monitor is based on the highly successful Triple Plus+ and Detective models, building on the reputation, reliability and versatility of its forebears. Detective+ is inherently rugged and robust, with a sturdy fixed or folding leg protective frame options. Loud and clear alarms can be transmitted between Detective+ units while an optional built in pump allows faster gas response and better sensor protection. Detective+ may now be equipped with infra-red sensor technology, which provides either CO2 detection, or allows higher flammable gas level monitoring and immunity to the poisoning effects which standard flammable gas sensors can suffer from. There are now two options for battery capacity, either 36 hours or 60 hours with standard configuration, providing remote sites with extended usage in-between charges. Couple these features with the wide range of toxic gas sensors available and it makes Detective+ one of the most versatile area monitors available.
BW TECHNOLOGIES - MicroDock II
Cost effective calibration and bump test management
The most cost effective way to manage the calibration and bump testing of BW’s portable gas detectors is through the MicroDock II automated test and calibration system. Fully portable and easily expandable, the MicroDock II requires no computer and provides simultaneous management of up to ten modules. Minimize expenses and maximize productivity with the MicroDock II.
BW TECHNOLOGIES - GasAlertClip Extreme
Up to three years of continuous maintenance-free protection
As the world’s most popular and widely used zero-maintenance gas detector, the GasAlertClip Extreme offers continuous, reliable protection. Available in two year or three year versions, this single gas detector requires no calibration, sensor replacement, battery replacement, or battery charging. Compatible with the MicroDock II automatic test system, the simplicity of the GasAlertClip Extreme combined with minimal training requirements and negligible maintenance costs, make the GasAlertClip Extreme one of the most cost-effective PPE solutions for facility workers and on-site contractors.
- Durable, reliable and easy to use with no downtime
- Record keeping is accurate and easy with automatic event logging
- Exceptionally low cost of ownership
- Compatible with BW MicroDock II automatic test station
- Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms
- Bright wide-angled visual alarm bars
- Built-in concussion-proof boot
- Water-resistant
BW TECHNOLOGIES - GasAlertQuattro
Visual auditing, easy compliance
Rugged and reliable, the GasAlertQuattro four-gas detector combines a comprehensive range of features with simple one-button operation. With flexible power options, the GasAlertQuattro is always ready. The graphic LCD displays easy to identify icons that indicate operational information, such as bump test and calibration status for simplified onsite auditing. IntelliFlash provides continuous visual confirmation of detector operation and compliance. Suited to a wide range of industrial applications including confined space entry, the GasAlertQuattro is fully compatible with BW’s MicroDock II automatic test and calibration system.
Features:
- IntelliFlash verifies operation and compliance to both the user and supervisors from up to 20 ft. / 6.1 m
- One-button operational simplicity
- Easy to identify icons for onsite auditing and compliance
- Field-proven Surecell sensors offer an unprecedented performance, even in the harshest environments
- Easy-to-read, multi-language LCD displays all four gas concentrations (H2S, CO, O2 and combustibles) simultaneously
- Audible, visual and vibrating alarm
- Extended alarm bars
- Flexible, interchangeable battery options with extended runtimes
- Full function self-test is initiated upon activation and runs continuously during operation
- Heartbeat pulses continually during normal operation
- Extensive datalogging and event logging capability
- User-options, such as flip display, accessible through IR interface for tamper-proof operation
- Multi-language support in English, French, German, Spanish and Portuguese
- Compatible with MicroDock II automated test and calibration system
BW TECHNOLOGIES - GasAlertMicro5
Providing protection from up to five potential atmospheric hazards including oxygen, combustible and toxic gases, GasAlertMicro 5 is unparalleled in its versatility, capability and overall value. BW’s newest addition to its water-resistant line of portable gas detectors has transformed the market with its matchless array of features.
Continuously monitoring and displaying concentrations of up to five gases, the compact and lightweight GasAlertMicro 5 was designed and engineered with an extensive host of applications in mind.
Features
- Integral concussion-proof boot
- Optional integral motorized pump option for remote sampling
- Powered by three AA alkaline batteries or a hot-swappable rechargeable battery pack
- Triple alarms (audible, visual and vibrating)
- Multi-language support in English, French, German, Spanish and Portuguese
- Large, user selectable backlit LCD
- Four alarm levels: Low, High, TWA and STEL
- Compatible with MicroDock II Automatic Test and Calibration Station
- Datalogging models store and recall event information
- Wide range of user selectable field options including password protection, safe and stealth modes.
Self-Tests
- Full function self-test confirms sensor, battery and circuitry integrity and audible/visual alarms on activation
HONEYWELL ANALYTICS - Lumidor MicroMAX pro
The MicroMAX Pro has it all – it’s easy to use, reliable, high quality, economical and lightweight. It also has a short response time, built-in data logging, lifetime warranty (excluding sensors and pumps), is certified for explosive dust environments and has Voice Assist.
With the addition of the voice message feature, this gas detector focuses on worker safety. You can select your language – English, French, German and Spanish – from one of the four that are included with the monitor. The visual language on the 4-line display will be the same language you selected for the voice function. Every function – from immediate warnings to simple on and off functions – is accompanied with a voice message when activated. This feature is especially valuable in poorly lit environments.
The MicroMAX Pro is OSHA compliant and has a rugged case that shields the monitor from dust, water and heavy impact. It also provides superior RFI/EMI shielding. Additionally, the MicroMAX Pro is designed, tested and manufactured under strict ISO 9001 standards, and is UL classified for use in hazardous locations.
The MicroMAX Pro combines diffusion and built-in internal sampling pump systems for simultaneously monitoring up to five gases. The internal pump allows for easy pre-testing in confined spaces and provides almost instantaneous readings of gas concentrations. In order to save power, the pump can be switched off and the diffusion mode will take over.
HONEYWELL ANALYTICS - Lumidor Impact and Impact Pro
Market leading, very flexible portable gas detector, capable of monitoring 4 gases at once.
Using high specification flammable, Oxygen and patented Surecell™ toxic sensors, our unique cartridge technology ensures safe, accurate and reliable measurements are always made.
Available in two configurations, the Impact and Impact Pro accepts either disposable and/or serviceable cartridges respectively, all of which are pre-calibrated and can be replaced in under one minute, simplifying maintenance and minimizing cost wherever possible. Compact and rugged, these monitors are designed for tough working environments while being small, lightweight and unobtrusive, making them ideal for use in confined spaces where entry and exit may be difficult.
Gas checks prior to entering a confined space can be carried out using a drop line, hand aspirator or via an optional built-in pump (supplied as standard on the Impact Pro) that turns on and off automatically when the sampling tube is connected.
Ultra-bright alarm lights and a powerful audible alarm, coupled with a periodic green flash and bleep provide user confidence that monitoring is always in operation and alarms are never missed. For noisy environments a vibrating alarm is included as standard on the Impact Pro. A large, multi-lingual, backlit display, with intuitive menu system simplifies use and minimises operator training.
Available for use with a wide range of accessories including the unique Enforcer calibration system and compliance friendly Safelink communication system, the Impact range of portable multigas monitors is ready to protect you when most needed.
HONEYWELL ANALYTICS - Enforcer
The Enforcer provides easy and cost-effective ‘bump testing’ for the Impact range of multi gas detectors.
Regulations require regular testing of gas monitoring equipment to ensure that the instrument will work as and when required.
The Enforcer allows you to easily comply with regulations when using an Impact multi-gas monitor without the need for costly test facilities or third parties.
‘Bump’ testing should be carried out before use of any portable gas detector. This involves exposing each gas sensor to a known concentration of target gas and ensuring that it responds correctly. If not, the unit must be re-calibrated or serviced to replace those parts not working.
Personal gas monitors are normally calibrated every 3 to 6 months. Typically this requires specialist knowledge and equipment that is costly or the work is sub-contracted to a third party. During this time instruments are not available for use and so could delay essential operations or force additional monitors to be purchased.
The Enforcer calibrates Impact multi-gas monitors fitted with Oxygen, flammable, Carbon Monoxide and Hydrogen Sulphide sensors in less than two minutes. Volumes and flow rates are minimised to allow approximately 200 calibrations per cylinder of gas making calibration as low in cost as a ‘Bump’ test.
Impact instruments when used with the Enforcer are always available for use. Calibration results are recorded for printing at a later date via the optional PC software thereby ensuring that instrument histories are always available if required.
HONEYWELL ANALYTICS - MDA Scientific SPM Single Point Monitor
A fast response device detecting down to ppb of toxic gases, providing physical evidence of a gas event.
This use-anywhere, fast response monitor is specific to your target gas only. Until now, the big concern with basic units for toxic gas monitoring was that environmental conditions or other chemicals interfered with accurate detection.
That is why Honeywell Analytics developed the MDA Single Point Monitor (SPM) utilizing our exclusive, interference-free Chemcassette detection technique.
The SPM´s standard weatherproof enclosure will withstand the rigors of outdoor operation. A purged enclosure is optional for hazardous areas. You can also specify the SPM
GAS MEASUREMENT INSTRUMENT, LTD - GasTrEx
The GMI GasTrEx is a hazardous area transmitter sensor unit which, when used along with one of our extensive range of flammable, toxic or oxygen deficiency, flameproof detection heads provides continuous, robust and accurate protection to personnel and property.
Features
- Common electronic platform – simply fit the correct “personality” module unit
- Detection head may be fitted locally or remote from transmitter unit
- Uses well proven, reliable sensor technology including catalytic, electrochemical, PID and infra-red sensor types
- Fully programmable, including alarm set points, latching or non-latching alarm relays, energised or de-energised alarm relays
- Simple but secure non-intrusive, one-man calibration and configuration using GMI magnetic wand
- Ingress protection IP 66
- Available in display or non-display versions
- Available in marine grade aluminium or stainless steel versions
- Multiple output configuration allows easy interface to external control panel
- Large clear backlit LCD display and high intensity LED indication
- Integral mounting holes allows easy installation
- Optional on board relays provide local alarms – 3 alarm and 1 fault
- 3 / 4 wire operation, sink / source / isolated / passive / active
- ATEX certified for Zone 1 / 2 hazardous area
GAS MEASUREMENT INSTRUMENT, LTD - V!SA 5 GAS UNIT
A robust and accurate portable gas detector, the V!SA provides unrivalled protection in confined space applications with audible and visual alarms in the event of exposure to flammable or toxic gases.
Detecting and displaying up to 5 gases simultaneously using “plug and play” sensor technology, the V!SA is suitable for a host of applications in a variety of industries using infra-red, PID and catalytic sensors.
Pre-entry checking can be carried out with the optional internal sampling pump and diffusion operation, ensuring maximum battery life in confined spaces.
Features
GAS MEASUREMENT INSTRUMENT, LTD - GT SERIES 7 OPERATION GAS UNIT
Designed for the gas industry, the GT series are multi application instruments, satisfying all the needs of service technicians within a single unit. With 7 modes of operation, the GT series is the most versatile instrument available for working with gas.
The GT Series is suitable for the following operations:
Features
NET SAFETY MONITORING, INC - MILLENNIUM II MULTI AND SINGLE CHANNEL GAS DETECTION
With it’s innovative multi-channel controller technology and state-of-the-art SMART (Self Monitoring Analysis and Reporting Technology) sensors, the Millennium II Series of gas detectors is exceptionally versatile. With the optional dual channel option you can cover more area with a single transmitter and mix and match all sensor types.
Sensors can be easily exchanged, with Infrared, Solid State MOS, Electrochemical and Catalytic Bead sensors available and compatible with both the Millennium II and Millennium II BASIC transmitters. The Millennium II transmitter automatically recognizes any connected pre-calibrated sensor and maintains an uninterrupted digital signal between them, providing leading response times including the fastest response time in the market today for H2S Hydrogen Sulfide gas detection.
NET SAFETY MONITORING, INC - ECO-SENSE 2 WIRE LOOP-POWERED H2S GAS DETECTOR
The Net Safety Monitoring ECO-SENSE detector is a truly state-of-the-art H2S gas sensor/transmitter package designed specifically for 2 wire, loop-powered installations. An economic and ecological choice, this extremely low power detector functions in a 4-20mA “sink” mode at less than .75 watts with 10-30 Vdc with a full LED display.
Operator interface is via a menu driven magnetic keypad allowing full access without opening the enclosure. There are no potentiometers and all adjustments are performed through the keypad. Requires only a simple calibration magnetic (included) for non-intrusive calibration, no other special electronic devices are needed.
NET SAFETY MONITORING, INC - MILLENNIUM II TOXIC GAS DETECTOR
Net Safety’s next generation detector, the Millennium II BASIC is a robust, reliable, and low-cost safety solution delivering highly accurate detection and protection. Our state-of-the-art “SMART” (Self Monitoring Analysis and Reporting Technology) sensors provide a cost-effective detector solution that includes all the features you demand with complete ease-of-use and operation.
A full range of Combustible (Catalytic Bead & Infrared) and Toxic (Solid State & Electrochemical) sensors are available, all are completely interchangeable with the Millennium II and Millennium II BASIC transmitters.
NET SAFETY MONITORING, INC - SOLAR SHIELD; SOLAR POWERED DETECTION SYSTEM
Net Safety’s autonomous solar power system, the Solar Shield, is easy to install and simple to use. Its clever modular design is conveniently pre-wired and employs quick-connectors and plugable cables between the controller, solar panels and batteries – making installation virtually effortless!
With the Solar Shield’s prepackaged design and easy to configure outputs, wiring is minimized – saving you time and money when installing or performing maintenance. The scrolling display and status LEDs provide helpful information for field setup, operation and maintenance!
Select the hazard protection you need (Fire detectors, Toxic Gas or Combustible Gas sensors), and provide our sales representative with your specific installation location and load requirements. We’ll use that information to deliver a solar power system, sized to meet your unique site requirements
OTIS INSTRUMENTS, INC - OI-WF690 SENSOR ASSEMBLY
WireFree for detecting H2S, CL2, H2, SO2, O2, or NH3. All “4-series” electrochemical gases available upon request. Rain/Splash guard, stainless steel sensor housing, explosion-proof antenna fitting. Certified enclosure rated Cl I Div I, Grp C & D.
OTIS INSTRUMENTS, INC - OI-WF753 RELAYER
Sixteen channel WireFree relay assembly features non-intrusive setup and two non-latching relays that may be individually set per-channel to full-scale or off. Certified enclosure: Cl I Div I. AC/DC input power.http://www.inscollp.com/wp-admin/post.php?post=513&action=edit&message=1
OTIS INSTRUMENTS, INC - OI-WF752 RELAYER
Sixteen channel WireFree relay assembly features non-intrusive setup and two non-latching relays that may be individually set per-channel to full-scale or off. Certified enclosure: Cl I Div I. 12 -24 VDC input power.
OTIS INSTRUMENTS, INC - PERMIAN II OI-WF792-1 / 2
Two channel Wire-Free monitor compatible with any WireFree sensor assembly. Includes INTEGRA enclosure with clear door, dual tone alarm, and strobe alarm. 12- 24 V dc input power.
OTIS INSTRUMENTS, INC - PROSAFE OI-WF784
Eight channel WireFree monitor compatible with any wired or WireFree sensor assembly. Nema 4 enclosure, four alarm relays, and RS-485/232 RTU Modbus compatible. Each relay may be individually set per channel to full-scale or off; latching or non-latching. 12-24Vdc or 110VAC.
NET SAFETY MONITORING, INC - BANSHEE 343 ULTRASONIC GAS LEAK DETECTOR
The Banshee343 is an advanced gas leak detection system utilizing four ultra-sensitive acoustic sensors which constantly monitor wide areas for ultrasound generated from the release of pressurized gas. Ideally suited for monitoring well ventilated outdoor environments, the Banshee343 has been engineered to withstand even the most extreme conditions while including features designed to optimize performance and reduce maintenance.
Ultrasonic (acoustic) gas leak detection technology has several advantages over conventional gas sensor technologies: it does not have to wait until a gas concentration has accumulated to potentially dangerous concentrations, it does not require a gas cloud to eventually make physical contact with a sensor, and the response is instantaneous for all gas types.
- Widest Area of Coverage, 40 Meter Radius Through Four independent Sensors
- Instantaneous Response To All Types of Gas Leaks (LEL or ppm)
- Wide Temperature Range: -55°C — +85°C
- SonicCAL System — Automated Self Test and Sensor Cleanse – Failsafe & Maintenance Free
- Analog, Relay, and RS485 Digital Modbus
- Certified Worldwide for Hazardous Locations
- Detection range: 25kHz to 100 kHz — Widest Dynamic Range Available, 50db — 140dB
- Innovative Mapping Tool Helps Operators Achieve Optimum Performance At Site Location
- Programmable Time Delays to Allow for Pressure Venting, Etc.
The Banshee343 detects deadly gas leaks at the speed of sound without being affected by inclement weather, wind direction, leak direction or any potential gas dilution. When utilized together with Net Safety point gas detection and our optical flame detection, a complete and comprehensive safety system is ensured.
ABOUT ULTRASONIC GAS LEAK DETECTION TECHNOLOGY
Ultrasonic (acoustic) gas leak detection technology functions through the constant monitoring of wide areas by advanced acoustic sensors specially tuned to process ultrasound emitted from pressurized gas leaks. This detection technology has several advantages: it does not have to wait until a gas concentration has accumulated to potentially dangerous concentrations, it does not require a gas cloud to eventually make physical contact with a sensor, and the response is instantaneous for all gas types.
Simply put, the ultrasonic leak detector only triggers an alarm when inaudible, ultrasound is detected (between 25 – 100 kHz) — which is only produced with the release of highly pressurized gas. This makes for extremely reliable and efficient performance by the detection system as there is no poisoning of sensors, it never requires field calibration, and all background noises are accurately filtered.
The Banshee343 detects deadly gas leaks at the speed of sound without being affected by inclement weather, wind direction, leak direction or any potential gas dilution. When utilized together with Net Safety point gas detection and our optical flame detection, a complete and comprehensive safety system is ensured
ULTRASONIC DETECTION COVERAGE
In order to achieve optimum performance a site mapping survey is necessary to check background noise levels, ensure alarm levels are set above the normal background conditions, programming any necessary time delays to allow for pressure venting, and to ensure all potential leak areas have coverage by a detector footprint. Net Safety technicians are available during installation and commissioning as well as providing full training with our NSM-MT-01 mapping tool.
