SMOKE DETECTION
NET SAFETY MONITORING, INC - Millennium Smoke and Oil Mist Detector
The Millennium Smoke and Oil Mist Detector’s advanced sensor technology utilizes a powerful, single-beam IR lamp with no mirrors to ever be contaminated. Known contamination and reliability issues with “open path” mist detectors are eliminated as our point system design protects the lens from contaminants and does not operate with a reflector. Sensor performance is also not effected by high volume air velocity which allows for accurate reliable monitoring in any duct application. Field adjustable zero level of obscuration as well as multiple sensitivity settings allows for fine tuning within specific application conditions to optimize performance and eliminate false alarms.
NET SAFETY MONITORING, INC - SOLAR SHIELD; SOLAR POWERED DETECTION SYSTEM
Net Safety’s autonomous solar power system, the Solar Shield, is easy to install and simple to use. Its clever modular design is conveniently pre-wired and employs quick-connectors and plugable cables between the controller, solar panels and batteries – making installation virtually effortless!
With the Solar Shield’s prepackaged design and easy to configure outputs, wiring is minimized – saving you time and money when installing or performing maintenance. The scrolling display and status LEDs provide helpful information for field setup, operation and maintenance!
Select the hazard protection you need (Fire detectors, Toxic Gas or Combustible Gas sensors), and provide our sales representative with your specific installation location and load requirements. We’ll use that information to deliver a solar power system, sized to meet your unique site requirements
NET SAFETY MONITORING, INC - PLANTSAFE 8000
The PLANTSAFE 8000 is a PLC based solution approved for SIL 2 applications as per IEC 61508/61511 by TÜV for safety system applications. The system can be configured with dual or simplex CPU with simplex I/O. The system’s rugged open control platform incorporates Modbus TCP with built-in Fault Tolerant Ethernet (FTE) for redundant communications, providing you simple but secure connections to a wide range of standard software and hardware packages. This unique open approach allows users flexible migration paths. Connect to yesterday’s legacy control systems, interface with the most up-to-date instruments and software packages and look forward to the products that aren’t even developed yet – knowing that the PlantSafe 8000 will connect to them.
Features of this system are:
- SIL 2 Certified
- Certified to Class I Div II
- Conforms to NFPA 72
- Conforms to NFPA 85
- IEC 61131 Programming
- UL/CSA Approvals
NET SAFETY MONITORING, INC - PLANTSAFE 7000
The PLANTSAFE 7000 is a SIL 3 PLC based F&G system utilizing single rack and multiple rack system platforms. All systems are TÜV certified to SIL 3 according to IEC 61508 and meet all the requirements of IEC 61511 for when used as part of a F&G system. The system is inherently safe, achieving SIL 3 without the need for voting or redundant modules, and without any “degraded modes” or “time restrictions” for SIL 3 operation. It can also be configured as fully fault tolerant, providing maximum availability with SIL 3 safety.
Features of this system are:
- TÜV Certified for SIL 3 applications
- Simplex or Fault Tolerant Configurations (scaleable)
- TÜV Certified to NFPA 72
- TÜV Certified to NFPA 85
- TÜV Certified SIL 3 communications via safe ethernet
- Tight, seamless integration with any BPCS on the market
- IEC 61131-3 Programming
- TÜV Certified Function Blocks
- Certified to Class I Division II
- CSA, FM, FMC, UL, ULC Approvals
NET SAFETY MONITORING, INC - PLANTSAFE 6000
The PLANTSAFE 6000 is a PLC based system utilizing a range of intelligent safety PLC’s and remote I/O blocks (safety nodes). The PLC’s and remote I/O blocks are connected via high speed safe ethernet – using standard Ethernet networking hardware and TÜV certified for SIL 3 integrity between each. The safe ethernet network can be implemented in a high availability “ring” architecture allowing you to distribute your safety processing nodes throughout the plant – where ever you need them, providing significant saving in home run cabling. The PlantSafe 6000 is built on proven inherently safe technology SIL 3 certified “out of the box”, with no user configuration engineering required. PLC nodes start at just eight I/O with a comprehensive variety of remote I/O blocks, the small size and low cost make it an ideal fit for distributed applications with low I/O counts – but flexible enough to build large networks of safety protection.
Features of this system are:
- TÜV Certified for SIL 3 applications
- Connected by TÜV certified safe ethernet
- Low cost, scaleable architectures
- Easy DCS integration using same safe ethernet network via OPC DA, Modbus TCP, Ethernet IP or Serial using Modbus or Profibus on RS-485 networks
- IEC 61131-3 Programming
- TÜV Certified Function Blocks
- Certified to Class I Division II
- FM, FMC, UL, ULC Approvals
NET SAFETY MONITORING, INC - COMPLETE SYSTEM SOLUTIONS
Net Safety System Solutions is a product-independent, complete safety system provider. We offer fit-for-purpose technology solutions for F&G (Fire & Gas) and ESD (Emergency Shut Down) Systems with up to SIL 3 certification. What sets us apart is the ability to provide our customers with the total package – a specialized engineering solution within a wide range of specifications. We design your entire system utilizing the most efficient and cost-effective combination of products for your specific application – and we then fully support the entire system, from the HMI all the way down to the field devices.
When you partner with Net Safety Monitoring System Solutions you have a single source for the design, manufacture and support – for the life of your system.
With our one-stop-shop solution you’ll have the assurance that all aspects of your system design comes from a single source with full product support. Fire and gas detection has been our business for almost 20 years, our team of safety experts will work with you every step of the way to provide you with the optimum system solution to best meet your application requirements. Designed with a modular approach, our solutions also offer complete expansibility – whether connecting to legacy systems or the systems of tomorrow. We’re ready to help, let’s talk.
PLANTSAFE 8000 | PLANTSAFE 7000 | PLANTSAFE 6000
CORE ACTIVITIES OF NET SAFETY SYSTEM SOLUTIONS
- Project Management of Safety Systems
- Project Engineering
- Hardware Design/Panel Design
- Documentation
- Panel Fabrication
- Software Design and Development
- Factory Acceptance Tests
- Site Acceptance Tests
- Commissioning and Start-Up Activities
- Post Sales Support Services
